These are the most requested MoesHouse thermostatic heads: Without gateway, mechanical control and solid metal thread | China Planet
Other smart devices

These are the most requested MoesHouse thermostatic heads: Without gateway, mechanical control and solid metal thread

subscribe
Point out
guest

12 Comments
oldest
Latest Most votes
Inline feedback
Show all comments
...

Hello, will it be able to pair with the Aqara hub?

Frederik

No, only with a Zigbee hub.

Jozko

What kind of answer is that? Zigbee is a protocol, Aquara hub also has it.
But it won't work, you need a hub and an app from the manufacturer of that head.

Frederik

What should that answer be? Correct answer. In the article, the hubs are linked, which are named Zigbee 3.0. So what else to call them? AliExpress refers to them as Zigbee hubs. In addition to Moes, they are also produced by other Chinese no-name manufacturers.

Andrei

Aqara hub is a Zigbee 3.0 hub…

Luke

I have Moes heads, two different types of WiFi TRV 603 and 604, they work, but the problem is that they do not show the temperature in the room accurately, I have a thermometer on the table and the corrections run as I want, I set the deviation according to the external thermometer and on the second day it is still not accurate, it needs to be corrected again so that it measures correctly. To tell the truth, this is getting on my nerves, I'm thinking about putting them away and bringing back the floods. If it were possible to pair it with some external Tuya thermometer, it would work, this one, when it measures directly on the head immediately on the radiator, can never measure it accurately. Heat simply goes from the radiator and it distorts the overall temperature on the head.

Martin

Can Slovak be set like on the older heads? I can't figure it out like 🤣

Jozko

I would be worried about Wi-Fi, whether the reliability of the communication in the panels and also the battery will last.
Furthermore, the inability to combine automation with sensors other than those of the manufacturer, if any at all...

Frederik

Automation works, we tried it in the review. You can normally make scenes with the Wi-Fi version as well. You need to study it first before you start writing something like this.

Radovan

I would never put it on, you also need valves, that should be mentioned. When it goes wrong, there are only problems and you have to keep one valve without a head. The flow will be better

PalPlo

Hello,

Is the temperature sensor for ambient temperature or for the water that is flowing?

I would like to ask if it is possible to use these heads for water underfloor heating distributors? Thank you very much.

If it is set to 23 degrees and it evaluates that the sensor has already recorded 23 degrees, does it also close the valve partially or does it only have open/closed values? Thank you.

Frederik

Hello, the sensor is for ambient temperature. We haven't tried it for underfloor heating, we don't know of anyone using it outside of classic radiators, this is probably just something to try. The valve can only be closed or opened. You can connect an external smart Tuya thermometer to the valve via the application, which won't distort as much.